|
|
|
#1
12-04-2011, 05:32 PM
|
|||
|
|||
Hi from the UK
I'm Neil from Cumbria in the UK and I've been working with classic cars (LBCs) for over thirty years. I have done plenty of welding and made (somewhat crude) repair panels, but now I need to up my game so I hope I can learn from the vast knowledge on here.
|
|
#2
12-05-2011, 04:07 AM
|
||||
|
||||
|
Hi Neil,
Welcome to the site. It's staggering how much you can learn here if you keep an open mind. 
__________________
------------------------------ Stuart Hickling The Scuderia Obsoleto Blog www.spannerdude.wordpress.com
|
|
#3
12-05-2011, 05:19 AM
|
|||
|
|||
|
Hi Neil, wlcome to the forum. There is loads of info on here, all you have to do is tak what you need from the various posts and run with it, when you get stuck post your disasters and your sure to get feedback an ideas on where you went wrong and how to sort it ... before you know it the pennys dropped, things get easier and your off and running freestyle ..
Everyone on here has been there with shaping problems, so dont hold back on pic posting there is a lot more to be learned sometimes from seing problems and reading the solutions than seeing pics of finnished stuff, finnished stuff is good as well though... enjoy
__________________
Ian
|
|
#5
12-05-2011, 10:13 AM
|
|||
|
|||
|
Hi Neil, welcome to the site, there are a few of us Brits on this forum.
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
|
#6
12-05-2011, 06:21 PM
|
|||
|
|||
|
Welcome to the site Neil
 Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
