|
|
|
#1
05-14-2012, 02:55 PM
|
|||
|
|||
Hello from Kansas
Hello, my name is Chad. I'm a Mechanical Engineer in Kansas. Currently I am working on a KR200 Messerschmitt for a friend. I purchased a HF bead roller (and had to beef it up of course) to replace the floor pans in the Messerschmitt. Looking for more information on bead roller mods and would like to make my own dies.
__________________
Chad 
|
|
#2
05-14-2012, 02:58 PM
|
||||
|
||||
|
Chad, welcome and thanks for the introduction. Lots of information here to help you with the floor project. If you have questions just ask and someone will help you. Thanks for joining us.
__________________
Joe Hartson There is more than one way to go to town and they are all correct.
|
|
#3
05-14-2012, 03:37 PM
|
|||
|
|||
|
Hi and welcome Chad,
I'm down the interstate from you about 90 miles, but go to Salina often. Matter of fact I lived there for many years. I had to google the KR200 Messerschmitt, but after seeing pics, I remembered it. My wife would like it. If you've got a metal lathe, the dies are easily done. I've made a bunch of dies for my modified HF bead roller over the years.
__________________
Bob
|
|
#4
05-14-2012, 03:47 PM
|
|||
|
|||
|
Hi Chad, welcome to allmetalshaping!
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
|
#5
05-14-2012, 04:13 PM
|
|||
|
|||
|
HI Chad welcome to the site
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
