|
|
|
#1
09-02-2012, 03:51 PM
|
|||
|
|||
Hello from Germany !
Hello !
I`m Michael from Germany. I work as Automotive Mechanic and I`m very Interested in Bodywork (Metal). I want to buy or build Metal Shaping Machines, such as Bead Roller, English Wheel and Shrinker/Stretcher. After that, I will learn how to use them right. I`m sure, i will be in good hands. P.S. Sorry for my English.
__________________
Regards, Michael 
|
|
#2
09-02-2012, 04:53 PM
|
||||
|
||||
|
Welcome to AllMetalShaping Michael.
There are several of your countrymen on here and I'd strongly recommend you visit with some of them and use their machines before you build or buy anything. There is nothing worse than spending the time or money on something only to learn later that it isn't what you want. Your English is just fine.
__________________
Kerry Pinkerton
|
|
#4
09-02-2012, 10:40 PM
|
|||
|
|||
|
HI Michael welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#5
09-03-2012, 08:33 AM
|
||||
|
||||
|
welcome. i think your english is better then mine!
i made the mistake when i started in this to spend my money on tools and not metal to practice on. then i joined here and learned how much can be done with simple hand tools.
__________________
Brent Click
|
|
#6
09-03-2012, 04:50 PM
|
|||
|
|||
|
Hello Michael, welcome to all metalshaping!
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
 |
|
|
Linear Mode
